Manual for Apple iOS

1. Basic equipment iOS

You need:

2. Closing app generally

Only one app can communicate with the Beacon. That's the reason why it is VERY important to close all active apps that communicate with the Beacon. Also when it comes to errors, it is important not only to hide the app like you usually do in iOS, but to close it to force a restart of the app. Please follow the following instructions:

1 2 3
Push the home button twice very fast Swipe up to close all apps Restart app
3. Counter Config
1 2 3 4 5 6
Action Select the correct Beacon Enter password 0000, tap on "Next Step" Choose axis (For slurry counting y axis) Move Beacon to empty position, tap on the picture, WAIT a few seconds until the inclination approaches the value 0 Move Beacon to full position, if negative => invert by tapping on the switch, If inclination is stable => tap on the picture Configuration mode suceeded
Possible errors No Beacons shown Nothing shown Nothing shown
Fix Press Refresh button, Turn on Bluetooth Close app, turn on Bluetooth, restart app Close app, turn on Bluetooth, restart app
4. Counter Plus
1 2 3 4
Action Select correct Beacon Tap on Anonymous to login Enter password 0000, tap on "LOGIN" The countered slurries and operation hours will be shown now, After a slurry was countered (5 seconds over the limited value) it lasts a few seconds until the slurry number will be updated
Possible errors No Beacon shown Nothing will be shown
Fix Press refresh button, turn on Bluetooth Tap on "Totals" at the bottom of the tabs => User role will be updated